Pro Series Heavy Duty Reversing Camera

Pro Series heavy duty reversing camera for commercial and towing applications. This camera rated at IP69K rating provides protection against ingress of dust and high temperature, high pressure water.

In-line joystick control with multiple firmware options for Image mirror reverse, 0 LUX (LED ON), Guidelines, Edge Luminance, Contrast, Sharpness, Colour , Display, Backlight, Light sensor adjustments, Electronic shutter, Auto gain control, Camera labelling for multi-camera setup, More control than you will ever need!

Heavy Duty Reversing Camera
Car Reversing Camera

Heavy Duty Universal Reversing Camera

Selmax Motors’s Heavy Duty Universal Reversing Camera for commercial or towing vehicles. The Infra-Red camera consists 14 LEDs for excellent night vision. Manufactured from steel and powder coated black. Power and video lead has a 22mm rubber grommet to ensure a water tight seal when installed. Universal RCA connection with separate power and earth wiring. Also available with a 4PIN connector (26-044C).

Heavy Duty Universal Reversing Camera (White)

Selmax Motors Heavy Duty Universal Reversing Camera for commercial or towing vehicles. The Infra-Red camera consists 14 LEDs for excellent night vision. Manufactured from steel and powder coated white. Power and video lead has a 22mm rubber grommet to ensure a water tight seal when installed. 4 Pin connector.

car reverse camera
mini CCD bracket reversing camera

Mini CCD Bracket Reversing Camera

Selmax Motors reversing camera ideally suited for tray-back or style side vehicles. Camera is able to be adjusted in a vertical position to suit the desired viewing angle. RCA connection with separate power and earth connection making it versitile with most monitors. Minimum operation voltage is 9.6 Volt. Suitable for many other passenger vehicles.

Mini CCD Butterfly/Bumper Reversing Camera

Selmax Motors universal butterfly/bumper camera. Suits all vehicle’s. Camera comes with a converter so that it can be mounted into a rear bumper bar. This camera has a high quality sharp lens rated at 0.1 LUX which is fantastic for low lighting areas. At night this camera will give a better picture than most factory fitted reversing cameras. Powder coated and manufactured from brass the camera has a 12 month warranty

bumper reversing camera
stalk reversing camera

Mini CCD Stalk Reversing Camera (Original Equipment Style)

Selmax Motors has been Australia’s leading supplier for reversing camera’s and parking camera’s for many years. Here at Selmax Motors we are very proud of this unique camera which provides incredible picture quality. The camera has switchable guidelines, 0.1 LUX low light picture, which provides a high quality image in very low light. Mounted via 10mm threaded stalks makes it tamper proof. Generally this camera is mounted above the number plate on the boot latch shelf area to provide the best viewing angle. A must have for the safety of your vehicle and those around you when parking or reversing out of enclosed driveways.

CCD Butterfly Reversing Camera

  • 170° View angle
  • NTSC
  • 0.2 LUX
  • Mirror Image (snip blue wire to convert to forward camera)
  • Water resistant
  • 9.6 Volt – 14 Volt operation
  • Sharp lens
  • Black Powder coated brass
  • Size: 20(L) x 18(W) x 18mm(H)
CCD butterfly reversing camera
CCD stalk up reversing camera

CCD Stalk Up Reversing Camera

  • 170 Degree View Angle
  • NTSC
  • 0.2 LUX
  • Mirror image blue wire
  • 12 Volt DC
  • Water Resistant
  • Treaded Stalk
  • Size: 20(l) X 18(W) X 18mm(H)

CCD Night Vision Bracket Reversing Camera

  • 170 Degree view angle
  • NTSC
  • 0.2 LUX
  • 12 Volt
  • Water resistant
  • 9 Infra Red LED’s for excellent night vision
  • Angle adjustable plates
  • Size: 30(L) X 56(W) X 40mm(H)
night vision bracket reversing camera
camera mounting catalogue

The ideal camera mounting location on a vehicle is above the bumper bar with part of the bar and or towbar visible in the image, this gives the driver a reference point in relation to any obstacles.